UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf2880 Kutsiva Project

Tsanangudzo Pfupi:

Product Overview

UFF2880 mhando capillary hollow fiber membrane yakakwira polymer zvinhu, izvo zvisingazove nechero shanduko yechikamu. Yakagadziridzwa PVDF zvinhu, iyo inogamuchirwa pachigadzirwa ichi, ine yakanaka permeable mwero, yakanaka mechanicha zvivakwa, yakanaka makemikari kuramba uye kusvibiswa kuramba. MWCO i200K Dalton, membrane ID/OD iri 0.8mm/1.3mm, mhando yekusefa iri kunze-mukati.

Tumira email kwatiri

Product Detail

Product Tags

Applications

Kunwa kurapwa kwepombi mvura, pamusoro pemvura, mvura yemugodhi uye mvura yemurwizi.
Pretreatment yeRO.
Kurapa, kudzokorodza uye kushandiswazve kwemvura yakaraswa mumaindasitiri.

Filtration Performance

Ichi chigadzirwa chinoratidzwa kuti chine pazasi kusefa mhedzisiro zvinoenderana nemamiriro ebasa emvura dzakasiyana masosi:

Ingredient	Mhedzisiro
SS, Zvikamu> 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Utachiona, Utachiona	> 4 log
Turbidity	<1NTU
TOC	Kubvisa Mwero: 0-25%

* Pamusoro data inowanikwa pasi pemamiriro ekuti kudyisa mvura turbidity ndeye <25NTU.

Product Parameters

chigadzirwa-tsanangudzo1

Technical Parameters

Rudzi rwekusefa	Kunze-mukati
Membrane Material	Yakagadziridzwa PVDF
MWCO	200K Dalton
Membrane Area	77m²
Membrane ID/OD	0.8mm/1.3mm
Dimensions	Φ225mm*2360mm
Connector size	DN50 Clamping; Air Inlet - 10mm yemhepo pombi

Application Data

Mvura Yakachena Flux	11,000L/H (0.15MPa, 25℃)
Yakagadzirwa Flux	40-120L/m².hr (0.15MPa, 25℃)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.15MPa
Maximum Backwashing Pressure	0.15MPa
Kugeza Kwemhepo Volume	0.1-0.15N m³/m².hr
Air Washing Pressure	≤ 0.1MPa
Maximum Working Temperature	45℃
PH Range	Kushanda: 4-10; Kugeza: 2-12
Operating Mode	Cross Flow kana Dead End

Kudyisa Mvura Zvinodiwa

Usati wadyisa mvura, sefa yekuchengetedza <50 μm inofanira kuiswa kudzivirira kuvhara kunokonzerwa nezvikamu zvakakura mumvura yakasvibirira.

Turbidity	≤ 25NTU
Mafuta & Girisi	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Inopfuurira Residual Chlorine	≤ 5ppm
COD	Zvinokurudzirwa ≤ 500mg/L

*Zvinhu zveUF membrane ndeye polymer organic plastiki, hapafanirwe kuve nechero organic zvinonyungudutsa mumvura mbishi.

Operating Parameters

Backwashing Flow Rate	100-150L/m².hr
Backwashing Frequency	Imwe neimwe 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 nguva pazuva
CEB Nguva	5-10min.
CIP Frequency	Yese 1-3 mwedzi
Washing Chemicals:
Kubereka vana	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid / 0.2% Hydrochloric Acid