UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment

Tsanangudzo Pfupi:

● Yakanyanya kujeka inoparadzanisa tekinoroji yekudzora, yunifomu pore saizi inoita mvura yakanaka kubuda;

● Membrane zvinhu nekusingaperi hydrophilic character uye high flux, yakaderera transmembrane pressure uye yakaderera kushanda simba kushandiswa;

● Porous mvura yekugovera chimiro inoderedza kusvibiswa ngirozi yakafa uye inoita kuti zvive nyore kugeza;

● Inotengeswa kunze kwenyika yakasvibirira ine simba guru rekuputsa, high acid & alkaline resistance, high oxidation resistance uye kuchembera kuramba;

Tumira email kwatiri

Product Detail

Product Tags

Product Overview

UFF225 capillary hollow fiber membrane yakakwira polymer zvinhu, izvo zvisingazove nekuchinja kwechikamu. Yakagadziridzwa PVDF zvinhu, iyo inogamuchirwa pachigadzirwa ichi, ine yakanaka permeable mwero, yakanaka mechanicha zvivakwa, yakanaka makemikari kuramba uye kusvibiswa kuramba. MWCO i200K Dalton, membrane ID/OD iri 0.8mm/1.3mm, mhando yekusefa iri kunze-mukati.

Applications

Kunwa kurapwa kwemvura yepombi, mvura yepamusoro, mvura yemugodhi uye mvura yerwizi.
Pretreatment yeRO.
Kurapa, kudzokorodza uye kushandiswazve kwemvura yakaraswa mumaindasitiri.

Filtration Performance

Ichi chigadzirwa chinoratidzwa kuti chine pazasi kusefa mhedzisiro zvinoenderana nemamiriro ebasa emvura dzakasiyana masosi:

Ingredient	Mhedzisiro
SS, Zvikamu> 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Utachiona, Utachiona	> 4 log
Turbidity	<1NTU
TOC	Kubvisa Mwero: 0-25%

* Pamusoro data inowanikwa pasi pemamiriro ekuti kudyisa mvura turbidity ndeye <25NTU.

Product Parameters

chigadzirwa-tsanangudzo112

Technical Parameters:

Rudzi rwekusefa	Kunze-mukati
Membrane Material	Yakagadziridzwa PVDF
MWCO	200K Dalton
Membrane Area	60m²
Membrane ID/OD	0.8mm/1.3mm
Dimensions	Φ225mm*1860mm
Connector size	DN50

Application Data:

Mvura Yakachena Flux	12,000L/H (0.15MPa, 25℃)
Yakagadzirwa Flux	40-120L/m².hr (0.15MPa, 25℃)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.15MPa
Maximum Backwashing Pressure	0.15MPa
Kugeza Kwemhepo Volume	0.1-0.15N m3/m².hr
Air Washing Pressure	≤ 0.1MPa
Maximum Working Temperature	45℃
PH Range	Kushanda: 4-10; Kugeza: 2-12
Operating Mode	Cross-flow kana Dead-end

Kudyisa Mvura Zvinodiwa:
Usati wadyisa mvura, sefa yekuchengetedza <50 μm inofanira kuiswa kudzivirira kuvhara kunokonzerwa nezvikamu zvakakura mumvura yakasvibirira.

Turbidity	≤ 25NTU
Mafuta & Girisi	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Inopfuurira Residual Chlorine	≤ 5ppm
COD	Zvinokurudzirwa ≤ 500mg/L

*Zvinhu zveUF membrane ndeye polymer organic plastiki, hapafanirwe kuve nechero organic zvinonyungudutsa mumvura mbishi.

Operating Parameters:

Backwashing Flow Rate	100-150L/m².hr
Backwashing Frequency	Imwe neimwe 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 nguva pazuva
CEB Nguva	5-10min.
CIP Frequency	Yese 1-3 mwedzi
Washing Chemicals:
Kubereka vana	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid / 0.2% Hydrochloric Acid