Applications
Kunwa kurapwa kwemvura yepombi, mvura yepamusoro, mvura yemugodhi uye mvura yerwizi.
Pretreatment yeRO.
Kurapa, kudzokorodza uye kushandiswazve kwemvura yakaraswa mumaindasitiri.
Filtration Performance
Ichi chigadzirwa chinoratidzwa kuti chine pazasi kusefa mhedzisiro zvinoenderana nemamiriro ebasa emvura dzakasiyana masosi:
Ingredient | Mhedzisiro |
SS, Zvikamu> 1μm | Removal Rate ≥ 99% |
SDI | ≤ 3 |
Utachiona, Utachiona | > 4 log |
Turbidity | <1NTU |
TOC | Kubvisa Mwero: 0-25% |
* Pamusoro data inowanikwa pasi pemamiriro ekuti kudyisa mvura turbidity ndeye <25NTU.
Product Parameters
Technical Parameters
Rudzi rwekusefa | Kunze Kudzvinyirira |
Membrane Material | Yakagadziridzwa PVDF |
MWCO | 200K Dalton |
Membrane Area | 47m2 |
Membrane ID/OD | 0.8mm/1.3mm |
Dimensions | Φ200mm*1710mm |
Connector size | DN50 Clamping |
Application Data
Mvura Yakachena Flux | 9,400L/H (0.15MPa, 25℃) |
Yakagadzirwa Flux | 40-120L/m2.hr (0.15MPa, 25℃) |
Suggested Working Pressure | ≤ 0.2MPa |
Maximum Transmembrane Pressure | 0.15MPa |
Maximum Backwashing Pressure | 0.15MPa |
Kugeza Kwemhepo Volume | 0.1-0.15N m3/m2.hr |
Air Washing Pressure | ≤ 0.1MPa |
Maximum Working Temperature | 45℃ |
PH Range | Kushanda: 4-10; Kugeza: 2-12 |
Operating Mode | Cross-flow kana Dead-end |
Kudyisa Mvura Zvinodiwa
Usati wadyisa mvura, sefa yekuchengetedza <50 μm inofanira kuiswa kudzivirira kuvhara kunokonzerwa nezvikamu zvakakura mumvura yakasvibirira.
Turbidity | ≤ 25NTU |
Mafuta & Girisi | ≤ 2mg/L |
Yakamiswa Solids | ≤ 20mg/L |
Total Iron | ≤ 1mg/L |
Inopfuurira Residual Chlorine | ≤ 5ppm |
COD | Zvinokurudzirwa ≤ 500mg/L |
*Zvinhu zveUF membrane ndeye polymer organic plastiki, hapafanirwe kuve nechero organic zvinonyungudutsa mumvura mbishi.
Operating Parameters
Backwashing Flow Rate | 100-150L/m2.hr |
Backwashing Frequency | Imwe neimwe 30-60min. |
Backwashing Duration | 30-60s |
CEB Frequency | 0-4 nguva pazuva |
CEB Nguva | 5-10min. |
CIP Frequency | Yese 1-3 mwedzi |
Washing Chemicals: |
Kubereka vana | 15ppm Sodium Hypochlorite |
Organic Pollution Washing | 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide |
Inorganic Pollution Washing | 1-2% Citric Acid / 0.2% Hydrochloric Acid |
Component Material
Chikamu | Material |
Membrane | Yakagadziridzwa PVDF |
Kuisa chisimbiso | Epoxy Resins |
Housing | UPVC |