UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment

Tsanangudzo Pfupi:

● Hollow fibers yakakamurwa kuita 3 sectors, zvakaenzana kugovera backwashing mvura kune yega yega chikamu, zvichikonzera zvirinani backwashing effect;

● 304 Stainless simbi clamping chimiro chinopa kushivirira kwepamusoro, zvinobudirira kudzivirira mahombe eUF masisitimu kubva pakutsemuka nekudonha nekuda kwekukurumidza kukwirisa uye kukanganisa;

● Standard connector size, nyore kuisa;

Tumira email kwatiri

Product Detail

Product Tags

Product Overview

UFc200BL capillary hollow fiber membrane yakakwira polymer zvinhu, izvo zvisingazove nekuchinja kwechikamu. Yakagadziridzwa PVC zvinhu, iyo inogamuchirwa pachigadzirwa ichi, ine yakanaka permeable mwero, yakanaka michina zvivakwa, yakanaka makemikari kuramba uye kusvibiswa kuramba. MWCO iri 100K Dalton, membrane ID/OD iri 1.0mm/1.8mm, mhando yekusefa iri mukati-kunze.

Applications

Kugadzirwa kwemvura yemaminerari, mvura yemakomo emvura uye imwe mvura isina utachiona.
Kunwa kurapwa kwepombi mvura, pamusoro pemvura, mvura yematsime, mvura yerwizi, nezvimwe.
Pretreatment yeRO.
Kurapa, kudzokorodza uye kushandiswazve kwemvura yakaraswa mumaindasitiri.

Filtration Performance

Ichi chigadzirwa chinoratidzwa kuti chine pazasi kusefa mhedzisiro zvinoenderana nemamiriro ebasa emvura dzakasiyana masosi:

Ingredient	Mhedzisiro
SS, Zvikamu> 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Utachiona, Utachiona	> 4 log
Turbidity	<0.1NTU
TOC	Kubvisa Mwero: 0-25%

* Pamusoro data inowanikwa pasi pemamiriro ekuti kudyisa mvura turbidity ndeye <15NTU.

Product Parameters

chigadzirwa-tsanangudzo1

Technical Parameters:

Rudzi rwekusefa	mukati-kunze
Membrane Material	Yakagadziriswa PVC
MWCO	100K Dalton
Membrane Area	34m²
Membrane ID/OD	1.0mm/1.8mm
Dimensions	Φ200mm*1710mm
Connector size	DN50 Clamping

Application Data:

Mvura Yakachena Flux	10,000L/H (0.15MPa, 25℃)
Yakagadzirwa Flux	35-100L/m².hr (0.15MPa, 25℃)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.2MPa
Maximum Working Temperature	45℃
PH Range	Kushanda: 4-10; Kugeza: 2-12
Operating Mode	Cross-flow kana Dead-end

Kudyisa Mvura Zvinodiwa:
Usati wadyisa mvura, sefa yekuchengetedza <50 μm inofanira kuiswa kudzivirira kuvhara kunokonzerwa nezvikamu zvakakura mumvura yakasvibirira.

Turbidity	≤ 15NTU
Mafuta & Girisi	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Inopfuurira Residual Chlorine	≤ 5ppm
COD	Zvinokurudzirwa ≤ 500mg/L

*Zvinhu zveUF membrane ndeye polymer organic plastiki, hapafanirwe kuve nechero organic zvinonyungudutsa mumvura mbishi.

Operating Parameters:

Maximum Backwashing Pressure	0.2MPa
Backwashing Flow Rate	100-150L/m².hr
Backwashing Frequency	Imwe neimwe 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 nguva pazuva
CEB Nguva	5-10min.
CIP Frequency	Yese 1-3 mwedzi
Washing Chemicals:
Kubereka vana	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid / 0.2% Hydrochloric Acid